MIL-STD-2042-2 Fiber Optic Cable Topology Installation Standard Methods For Naval Ships Equipment Part 2 Of 7 PartsThis standard provides detailed methods for the installation of fiber optic cable topology equipment see 3.16, and optical fiber cable entry to fiber optic cable topology and other equipment.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70

MIL-STD-2042-2B(SH)

TABLE 2F1-II. Fiber color coding.

Fiber number	General Cable fiber color	Sumitomo Electric fiber color
		12-fiber bundle	18-fiber bundle
		12-fiber bundle	Subunit color (See Note)	Fiber color
1	Blue	Blue	Red	Blue
2	Orange	Orange		Orange
3	Green	Green		Green
4	Brown	Brown		Brown
5	Slate	Slate		Slate
6	White	White		Red
7	Red	Red	Violet	Blue
8	Black	Black		Orange
9	Yellow	Yellow		Green
10	Violet	Violet		Brown
11	Pink	Pink		Slate
12	Aqua	Aqua		Violet
13	N/A	N/A	Yellow	Blue
14	N/A	N/A		Orange
15	N/A	N/A		Green
16	N/A	N/A		Brown
17	N/A	N/A		Slate
18	N/A	N/A		Yellow

NOTE: The subunits of the 18-fiber bundles do not have color coded subunit jackets. The subunit color is determined by the presence of red, violet or yellow colored fiber within the subunit.

Step 5 - Slide the heat shrink tubing with the furcation unit identification over the furcation unit loose tube furcation cables onto the furcation unit body. Holding the heat gun approximately 100 mm (4 in) away from the furcation unit, shrink the shrink tubing.

Step 6 - End seal any furcation cables that will not be terminated in accordance with Method 1E1 of this standard.

2F1-7 METHOD 2F1