MIL-STD-2042-2B(SH)
1. SCOPE.
METHOD 2A1
CONVENTIONAL CABLE ENTRANCE TO EQUIPMENT VIA NYLON STUFFING TUBES
1.1 Scope. This method describes a procedure for optical fiber cable entry to fiber optic cable topology and other equipment through nylon stuffing tubes.
2. REQUIRED EQUIPMENT AND MATERIALS.
2.1 The equipment and materials in table 2A1-I shall be used to perform this procedure:
TABLE 2A1-I. Equipment and materials.
Description |
Quantity |
Safety glasses |
1 |
Ruler |
1 |
Deburring tool (or equivalent) |
1 |
Paint scraper |
1 |
Emery cloth |
As required |
Cable jacket stripping tool (NAVSEA DWG 6872812-08 or equal) |
1 |
Kevlar shears (NAVSEA DWG 6872812-16 or equal) |
1 |
Open end wrench (sized to fit locknut) |
1 |
Spanner wrench (sized to fit cap) |
1 |
RTV silicone rubber (Silastic 731731 or equal) |
As required |
Primer (type to suit metal) |
As required |
Talc (soap stone) |
As required |
Alcohol bottle with alcohol/2-propanol |
1 |
Wipes |
As required |
Canned air (or compressed air) |
As required |
3. PROCEDURE.
3.1 Safety summary. The following safety precautions shall be observed:
a. Safety glasses shall be worn at all times when handling bare fibers.
b. Do not touch the ends of bare fiber as they may be razor sharp. Wash your hands thoroughly after handling bare fibers.
2A1-1 METHOD 2A1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business