MIL-STD-2042-6 Fiber Optic Cable Topology Installation Standard Methods For Naval Ships Tests Part 6 Of 7 PartsThis standard practice provides detailed methods for testing optical fiber cable installations.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74

MIL-STD-2042-6B(SH)

B = P3 - P4

z4 - z3

Step 13 -Repeat steps 11 and 12 above for all the fibers in the optical fiber cable.

Step 14 -The optical fiber cable is considered satisfactory if the maximum measured attenuation for each fiber does not exceed the vendor's attenuation data by greater than 1 dB/km, or the maximum allowable attenuation specified in MIL-PRF-85045. (NOTE: If the maximum measured attenuation for a fiber exceeds the above values, the optical fiber cable may have been damaged.)

Step 15 -If the optical fiber cable is not going to be installed in a cableway within 14 days, end seal the optical fiber cable in accordance with Method 1A1 in Part 1 of this standard practice.

6B1-7

METHOD 6B1

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business