MIL-STD-2042-lB(SH)
Sealant
FIGURE lBl-l2. Completed repair. Step 8 - Remove heat and allow the sleeve to cool.
3.4 Procedure III. Method lBl-3 rubber tape.
3.4.l The equipment and materials in table lBl-V shall be used to perform this procedure.
TABLE lBl-V. Equipment and materials.
Description |
Quantity |
Safety glasses |
l |
Ruler |
l |
Electricians knife |
l |
Emery cloth (or fine file) |
As required |
Adhesive and sealant tape (Raychem Thermofit Sl030 or equal) |
As required |
Heat gun (Raychem 500B or equal) |
l |
Fiberglass tape (l in.) |
As required |
Electrical coating (3M Scotch Kote or equal) |
As required |
Alcohol bottle with alcohol/2-propanol |
l |
Wipes |
As required |
Canned air (or compressed air) |
As required |
Step l - Trim off any frayed, burned, or protruding jacket material with a knife using care not to damage the Kevlar, OFCC jacket, or BOF tubes (see figure lBl-l3). Square up the jacketing where required.
lBl-l0
METHOD lBl
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business