MIL-STD-792F(SH)
19 May 2006
1. SCOPE
1.1 Purpose. The purpose of this standard is to provide general requirements for the marking of raw materials, products and components.
1.2 Applicability. This standard provides general requirements for surface marking on components, component parts and piping for purposes of permanent identification, temporary identification and dimensional layout. Requirements for marking of raw materials as required by material specifications are not superseded by this standard. In the event of a conflict between the text of this standard and the marking requirements and prohibitions of product and component specifications and welding standards, this standard shall not take precedence.
2. REFERENCED DOCUMENTS
2.1 General. The documents listed in this specification are specified in sections 3, 4 or
5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of the documents cited in sections 3, 4 and 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards and handbooks. The following specifications, standards and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
Unless otherwise indicated, copies of federal specifications and standards are available from the ASSIST Online database at https://assist.daps.dla.mil or the Standardization Documents Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094).
SPECIFICATIONS
MILITARY
MIL-PRF-16173 - Corrosion Preventive Compound, Solvent Cutback,
Cold-Application.
MIL-DTL-24466 - Polyethylene Sheet, Bags, and Tubing, Green.
2.2.2 Other Government documents. The following other Government document forms a part of this standard to the extent specified herein.
CODE OF FEDERAL REGULATIONS (CFR)
27 CFR 21.47 - Code of Federal Regulations, Subpart D, Alcohol, Tobacco Products and Firearms
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business