MIL-STD-2042-4 Fiber Optic Cable Topology Installation Standard Methods For Naval Ships Cableways Part 4 Of 7 PartsThis standard practice provides detailed methods for installing optical fiber cable cableways and cable protection on surface ships and submarines.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

MIL-STD-2042-4B(SH)

5. DETAILED REQUIREMENTS

5.1 Cableways. Cableways for optical fiber cables shall be the same as those for electrical cables given in MIL-STD-2003-4 and as specified herein. These

methods will not be repeated in this standard practice; however, they are identified and listed here to aid the user in rapidly locating the applicable method in MIL-

STD-2003-4 to be used for optical fiber cable runs.

5.1.1 Cableways (submarines). The following methods and drawings shall be used to install cableways on submarines only:

MIL-STD-2003-4, Figures 4A1 through 4A14 and

NAVSEA Drawings 302-2146949 and 302-4456087

5.1.2 Cableways (surface ships). The following methods shall be used to install cableways on surface ships only:

MIL-STD-2003-4, Figures 4B1 through 4B55

5.1.3 Cableways (general). The following methods shall be used to install cableways on both submarines and surface ships:

MIL-STD-2003-4, Figures 4C1 through 4C27

5.1.4 Cable protection. The following methods shall be used to protect cables from mechanical or environmental damage:

MIL-STD-2003-4, Figures 4D1 through 4D10