MIL-STD-2003A(SH)
1. SCOPE
1.1 Scope. This standard covers shipboard installation requirements for electrical cable, equipment, penetrations, cableways, and connectors. This standard consists of this general standard and five parts as follows:
Part 1 (Cable) Preparation and end-sealing, entry to equipment and connectors, repair and splicing.
Part 2 (Equipment) Equipment mounting, switchboard mounting, battery equipment, casualty power, and shore power.
Part 3 (Penetrations) Swage tubes, stuffing tubes, kickpipes, surface ships and submarines, hull penetration, and general.
Part 4 (Cableways) General, submarine, surface ship and cable protection.
Part 5 (Connectors) Cable and conductor preparation in accordance with MIL-C-81511,
MIL-DTL-5015, MIL-DTL-26482, MIL-DTL-28840, MIL-DTL-22992, and
MIL-DTL-38999 connectors.
1.2 Application. Electrical plant installation methods parts 1 through 5 are to be used by all installing activities. These parts do not identify ship or type, but do establish minimum standards of acceptance for Naval ships. It is the responsibility of the user activity to determine which part satisfies their requirements. It does not authorize relaxation of any requirement specifically invoked by new construction, conversion, overhaul, or refurbishment contracts. In instances where deviated design requirements (for example, ship type, ship class, and so forth) conflict, the requirements of this standard govern. Any deviation for electric plant installation identified in
this standard is to be submitted to NAVSEA 05Z3 for resolution.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-5015 - Connectors, Electrical, Circular Threaded, AN Type, General Specification for
MIL-DTL-22992 - Connectors, Plugs and Receptacles, Electrical, Waterproof, Quick
Disconnect, Heavy Duty Type, General Specification for
MIL-DTL-26482 - Connectors, Electrical, (Circular, Miniature, Quick Disconnect, Environment
Resisting), Receptacles and Plugs, General Specification for
MIL-DTL-27599 - Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification for
MIL-DTL-28840 - Connectors, Electrical, Circular, Threaded, High Density, High Shock, Shipboard, Class D, General Specification for
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business