MIL-STD-1289D
TOPIC (paragraph reference) (MIL-STD-1289D requirement) |
COMPLIES |
PHOTO TAKEN |
DEVIATIONS/ COMMENTS |
Internal Store Clearances (see 4.3.3) - Contd Store to suspension (same as 4.3.2.3) (Minimum is 12.7 mm - noting that exceptions allowed.) |
|||
Ejection store clearance (see 4.3.3.7) (10 degree fall line required.) |
|||
Fuze Clearance (see 4.3.4) (Sufficient for installation/removal of fuzes.) |
|||
Ground Clearance (see 4.3.5) (Worst case with flat tire and depressed strut; in either static, take-off or landing attitude at a max AUW are: Air Force - 76.8 mm and 152.4 mm for rough terrain, Navy - 152.4 mm, and Army - 152.4 mm.) |
|||
Landing Gear Clearance (see 4.3.6) (Minimum is 25.4 mm.) |
|||
Engine Heat/Jet/Munitions Blast (see 4.3.7) (Insulation and blast and corrosion prevention provided.) |
|||
RAM Air Turbine Clearance (see 4.3.8) (Minimum is 25.4 mm.) |
|||
Accessibility (see 4.4) (Sufficient to safe suspension and release.) |
|||
Maintenance (see 4.4.1) (Sufficient to safe store and suspension and release equipment.) |
|||
Store Adjustment (see 4.4.2) (Sufficient to safe and adjust store.) |
|||
Sway Bracing (see 4.5) (Contact area satisfactory in accordance with MIL-A- 8591.) |
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business