MIL-STD-1289D
4.8.2 Store cradling or handling area.
A common area on the store shall be provided to ensure transporting, handling, and hoisting compatibility with various trucks, cradles, skids, and hoists. The strength and size of this area is defined in MIL-A-8591.
4.9 Safety.
Store installations shall provide maximum protection against inadvertent release as a result of, either human error, carelessness, or the material failure of components of the suspension and release system.
4.9.1 Ground safety device.
The store release system shall be equipped with a positive safety device or devices to preclude functioning, dropping, launching, or ejecting of suspended stores or activation of ejector devices when the aircraft is on the ground, even if the release or actuation system is energized.
4.9.2 Erroneous switch selection and single component failure.
The control of store stations shall be such that no single operation on the part of any crewmember will result in the inadvertent release or function of a store. No single component failure in the function or release control system shall result in the inadvertent function or release of a store.
4.9.3 Safetying.
Parts which may cause a hazardous condition by working loose in service shall be safetied or shall have other approved locking means applied.
5. DETAILED REQUIREMENTS
5.1 General.
For each specific store, applicable portions of the requirements for assuring proper fit and operation shall be selected for verification of compliance based on a review of the general and detailed specifications for that store. Appendix A should be used to document which test were, or more importantly, were not, performed. Dependent on their specific functional and operational characteristics, suitable performance tests shall be included for particular items and components. All applicable test procedures shall be performed unless reference can be made to an identical or more critical store installation, which has been satisfactorily demonstrated. No explosive ordnance will be used for the test described herein. During all testing, suitability of safety provisions shall be verified and unsafe conditions reported. The requirements of MIL- HDBK-1763 100 Series Test are also to be noted.
5.2 Test stores.
Test stores shall be fleet or production representative. The store shall be examined to confirm adherence to the detail requirements of the store specifications including adherence to dimensional and weight provisions, workmanship, safety, and maintenance and human engineering provisions. Inert stores - functionally and operationally complete with all accessories including suspension parts, electrical fittings, vent fittings, and other external protuberant fins, fuzes, and arming wires which are necessary to make a complete installation
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business