MIL-STD-1289D
4.4 Accessibility.
Access shall be provided to enable safe and efficient loading of stores and to adjust, maintain, and safe the suspension and release equipment and loaded stores.
4.4.1 Maintenance access.
Convenient access shall be provided for performing maintenance, which is allowed with the store in place.
4.4.2 Access for store adjustment.
Access shall be provided to enable operation of the necessary hand tools required to make proper adjustments on store and rack fittings, fuzes, arming wires, etc., when the store(s) are mounted on the suspension and release equipment.
4.5 Sway bracing.
Sway bracing or other means shall be provided to restrain the store against impact with the aircraft and against relative motion with respect to the aircraft. The contact area of the sway braces bearing on the store shall be sufficiently large so as to prevent damage to the store. Additional sway brace requirements are defined in MIL-A-8591.
4.6 Ejection mechanism.
Where a displacing or ejection mechanism is used for store separation, it shall make contact with the store at the appropriate reinforced or hardback points as defined in MIL-A-8591 and MIL-STD-1760.
4.7 Release system electrical devices and wiring.
Electrical equipment, adequate for control, operation, and release, shall be included to provide for the proper release of the store. Electrical connections/connectors and wiring shall be in accordance with SAE-AS50881 and MIL-STD-464. Special attention shall be given to ensure the electrical connections are adequately protected from damage or short circuits resulting from movement in the airstream, moisture, or from mechanical interference with moving parts of the store.
4.8 Armament weapons support equipment (AWSE) compatibility.
AWSE required during store loading shall fulfill intended purposes with respect to mechanical and functional characteristics without restrictions to mobility, impairment of usefulness, or durability imposed by peculiarities of the test item.
4.8.1 Special tools.
Store design shall permit installation, disassembly, reassembly, and service maintenance with tools and maintenance equipment normally available as commercial standards. Special tools and commercial standard tools are defined in MIL-S-8512.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business