An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Systems Engineering Standards And Specif Mil-Specs - FSC SESS

DI-SESS-81974 Assessment of Manufacturing Risk and Readiness

AFGS-87249 - Mechanical Equipment And Subsystems, Requirements For The Integrity Of (S/S By Mil-Std-1798)

The requirements of this specification apply to subsystems and equipment being developed or procured individually or as part of a specific weapon system. This specification is applicable to full-scale development programs and partially applicable to demonstration/evaluation or production programs. These requirements are derived from operational and support needs of the system, air vehicle, support, and training system, etc., and apply to specific subsystems, equipment/hardware which are required to perform a function, sustain loads, environments, handling, maintenance, test, and other types of usage.

AFGS-87256 - Integrated Diagnostics

This specification establishes requirements and verifications needed to ensure a sound integrated diagnostic design, development, and maturation for a given weapon item. This guide specification is applicable to all acquisition phases of new equipment orders, equipment modifications, retrofits, upgrades, and total systems.

ARMP-5 - Guidance On Reliability And Maintainability Training

ARMP-8 ED.1 - Reliability And Maintainability In The Procurement Of Off-The-Shelf Equipment

DOD-HDBK-292/1 - Training Materials Development Part 1 Of 2 (S/S By Mil-Hdbk-1379/2)

This handbook provides standardized procedures and guidelines for the preparation, support, review, approval, and evaluation of military training data/materials as specified in MIL-STD-001379 for the Training Materials Development Process.

DOD-HDBK-292/2 - Training Materials Development Part 2 Of 2 (S/S By Mil-Hdbk-1379/2)

DOD-STD-2140 - Machinery Alteration (Machalt) Instructions, Preparation Of (Metric)

MIL-A-87244 - Avionics/Electronics Integrity Program Requirements (Avip) (S/S By Mil-Hdbk-87244)

The scope of this specification includes airborne and ground based electronic systems, subsystems, equipment, or modules being developed individually or as part of a weapon system. This specification is applicable to full scale developmet programs and partially applicable to demonstration/evaluation or production programs. Note: In this document, the term "electronics" always includes avionics.

MIL-BUL-543 - List Of Standards Drawings Used By The Naval Air System Command (S/S By Mil Bull 544 Part I, Ii & Iii)

MIL-BUL-544/1 - List Of Federal/Military/Industry Specifications And Standards, And Navair Series Documents Approved By The Naval Air Systems Command - Part I Alphabetical Listing

MIL-BUL-544/2 - List Of Federal/Military/Industry Specifications And Standards, And Navair Series Documents Approved By The Naval Air Systems Command - Part Ii Numerical Listing

MIL-BUL-544/3 - List Of Federal/Military/Industry Specifications And Standards, And Navair Series Documents Approved By The Naval Air Systems Command - Part Iii Numeric Listings (Canceled Documents) (No S/S Documents)

MIL-DTL-18307 - Nomenclature And Identification For Aeronautical Systems Including Joint Electronics Type Designated Systems And Associated Support Systems

This specification establishes requirements for obtaining the official assignment of confirmation of nomenclature and for identification and re-identification marking for electronic and aeronautical equipment, including support equipment and systems; e.g., Test, Utility, Trainers, etc. Nomenclature procedures are explained in MIL-STD-196 for electronic equipment and MIL-HDBK-1812 for aeronautical, aeronautical support equipment, and photographic equipment.

MIL-E-16400 - ( Images) Electronic, Interior Communication And Navigation Equipment, Naval Ship And Shore: General Specification For (S/S By Mil-Std-2036)

This specification covers Naval ship and shore electronic, interior communication and navigation equipment, and those units of other Naval ship and shore equipment that utilize electronic technology.

MIL-E-4158 - ( Images) Electronic Equipment, Ground, General Requirements For (S/S By Mil-Std-454)

This specification covers the general requirements of the design and manufacture of ground electronic equipment.

MIL-E-5400 - ( Images) Electronic Equipment, Aerospace, General Specification For

This specification covers the general requirements for airborne electronic equipment for operation primarily in piloted aircraft. The detail performance and test requirements for a particular equipment shall be as specified in the detail specification for that equipment.

MIL-HDBK-189 - Reliability Growth Management

This guide provides an understanding of the concepts and principles of reliability growth. Guidelines and procedures to be used in managing reliability growth are also presented. This guide is not intended to serve as a reliability growth plan to be applied to a program without any tailoring. When used in conjunction with knowledge of the system and its acquisition program, it will allow for the development of a reliability growth management plan that results in a final system that meets its requirements and lowers the life cycle costs of the fielded system.

MIL-HDBK-2051 - Fiber Optic Shipboard Cable Topology Design Guidance

This handbook contains suggested design rules for defining a fiber optic cable topology. In addition, this document describes a suggested approach for developing and designing a fiber optic cable topology (FOCT) for a Naval platform and also identifies the applicable fiber optic component specifications. This handbook is primarily intended for use by the fiber optic cable topology design engineer, but provides useful information to a system design engineer as well.

MIL-HDBK-217 - Reliability Prediction Of Electronic Equipment

The purpose of this handbook is to establish and maintain consistant and uniform methods for estimating the inherent reliability (i.e., the reliability of a mature design) of military electronic equipment and systems. It provides a common basis for reliability predictions during acquisition programs for military electronic systems and equipment. It also establishes a common basis for comparing and evaluating reliability predictions of related or competitive designs. The handbook is intended to be used as a tool to increase the reliability of the equipment being designed.

MIL-HDBK-226 - Design Disclosure For Systems And Equipment

This handbook sets forth a methodology for preparing equipment and systems for design disclosures.

MIL-HDBK-251 - Reliability/Design Thermal Applications

This handbook recommends and presents electronic parts stress analysis methods which lead to the selection of maximum safe temperatures for parts so that the ensuing thermal design is consistent with the required equipment reliability. These maximum parts temperature must be properly selected since they are the goals of the thermal design, a fact which is often overlooked. Many thermal designs are inadequate because improper maximum parts temperature were selected as design goals. Consequently, the necessary parts stress analysis procedures have been emphasized. Specific step by step thermal design procedures are given in chapter 4.

MIL-HDBK-263 - Electrostatic Discharge Control Handbook For Protection Of Electrical And Electronic Parts, Assemblies And Equipment (Excluding Electrically Initiated Explosive Devices) (Metric)

This handbook provides guidance for developing, implementing and monitoring as ESD control program in accordance with the requirements of MIL-STD- 1686. Information is provided in 6.1 that cross references the various revisions of MIL-HDBK- 263 to the appropriate revision of MIL-STD-1686. This handbook is not applicable to electrically initiated explosive devices. The specific guidance provided is supplemented by the technical data contained in the appendices. Table I a cross-reference listing of MIL-STD-1686 requirements, MIL-HDBK-263 guidance, and MIL-HDBK-263 supplementary technical data.

MIL-HDBK-284/1 - Interactive Courseware (Icw) For Military Training, Manager'S Guide For Development, Acquisition, And Management Of (Part 1 Of 3 Parts) (S/S By Mil-Hdbk-1379/3)

This handbook describes all phases of ICW analysis, design, development, implementation, and logistic and life cycle support through the application of MIL-STD-1379 task descriptions and associated data item descriptions to appropriate contract vehicles.

MIL-HDBK-284/2 - Interactive Courseware (Icw) For Military Training, Portability Practices For (Part 2 Of 3 Parts) (S/S By Mil-Hdbk-1379/3)

This Handbook provides guidance on implementing the software interface and command requirements established by DoD Instruction 1322.20 and Mil-Std-1379, Appendix D, to ensure interactive courseware (ICW) and authoring system portability.

MIL-HDBK-284/3 - Interactive Courseware (Icw) For Military Training, Glossary For (Part 3 Of 3 Parts) (S/S By Mil-Hdbk-1379/4)

This glossary contains definitions of all key terms used in MIL-HDBK-284-1 and MIL-HDBK-284-2.

MIL-HDBK-338 - Electronic Reliability Design Handbook

This Handbook provides procuring activities and development contractors with an understanding of the concepts, principles, and methodologies covering all aspects of electronic systems reliability engineering and cost analysis as they relate to the design, acquisition, and deployment of DoD equipment/systems.

MIL-HDBK-344 - Environmental Stress Screening (Ess) Of Electronic Equipment

This Handbook provides uniform procedures, methods and techniques for planning, monitoring and controlling the cost effectiveness of ESS programs for electronic equipment. It is intended to support the requirements of MIL-STD-785, Task 301, "Environmental Stress Screening" and/or MIL-STD-781, Task 401, "Environmental Stress Screening" and to implement Air Force R&M 2000 ESS recommendations and guidelines.

MIL-HDBK-454 - General Guidelines For Electronic Equipment

This handbook provides guidance and lessons learned in the selection of documentation for the design of electronic equipment. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-472 - Maintainability Prediction

The purpose of this Maintainability Prediction Handbook is to familiarize project managers and design engineers with current maintainability prediction procedures. To achieve this objective, particular care has been exercised in selecting and including only those procedures which are currently used in predicting the maintainability of equipment and systems.

MIL-HDBK-5400 - Electronic Equipment, Airborne General Guidelines For

This handbook contains general guidelines for electronic equipment for operation in piloted aircraft and helicopters, missiles, boosters and allied vehicles. Detail electrical and mechanical design, performance and test requirements should be as specified in the detail specification or contract. This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply.

MIL-HDBK-762 - Design Of Aerodynamically Stabilized Free Rockets

Aerodynamically stabilized free rockets offer relatively simple, reliable, small, low-cost means for delivering payloads and, when great accuracy is not required, are often the optimum systems. This handbook provides engineering design information and data for such rockets. Primarily, this handbook is intended to cover the conceptual and preliminary design phases; however, reference is made to technical approaches and computer programs required for the system development phase. The material includes operational and interface requirements as they influence the design of the total weapon system.

MIL-HDBK-776 - Shafts, Elastic Torsional Stress Analysis Of

MIL-HDBK-781 - Reliability Test Methods, Plans, And Environments For Engineering Development, Qualification, And Production

This handbook provides test methods, test plans, and test environmental profiles which can be used in reliability testing during the development, qualification, and production of systems and equipment.

MIL-HDBK-798 - System Engineer'S Design For Discard Handbook

This handbook includes information on design for discard that is useful to the intended audience and is not otherwise conveniently available. Detailed engineering design and evaluation is beyond the scope of this handbook. Additional information on specific engineering topics is readily available in Army documents and in the open literature, such as books, professional journals, trade magazines, advertising material, short courses, and conference and symposium proceedings.

MIL-P-11268 - Parts, Materials, And Processes Used In Electronic Equipment

MIL-R-22732 - Reliability Requirements For Shipboard Electronic Equipment (S/S By Mil-Std-785)

MIL-S-83490 - Specification, Types And Forms (S/S By Mil-Std-961)

MIL-S-83490/1 - Specification, Types And Forms, Navsea Xws And Ws Series (S/S By Mil-Std-961)

MIL-S-83490/2 - Specification, Types And Forms, Military (Os) Series (S/S By Mil-Std-961)

MIL-S-87233 - Support Equipment Systems (S/S By Afgs-87233)

This specification establishes requirements to be satisfied in the design, development, and test (verification ) of the support equipment system and basic requirements to be satisfied in the selection, design, development, and testing of equipment items comprising that support equipment system.

MIL-STD-1289 - Airborne Stores, Ground Fit And Compatibility Requirements

This standard establishes the requirements and testing procedures for installations of all munitions and stores carried on an aircraft. It includes testing of all stores defined in 3.2.

MIL-STD-1289-SUP-2 - AIRBORNE STORES, GROUND FIT AND COMPATIBILITY REQUIREMENTS

This standard establishes the requirements and testing procedures for installations of all munitions and stores carried on an aircraft. It includes testing of all stores defined in 3.2.

MIL-STD-130 - Identification Marking Of U.S. Military Property

This standard provides the item marking criteria for development of specific marking requirements and methods for identification of items of military property produced, stocked, stored, and issued by or for the Department of Defense (DoD). This standard addresses criteria and data content for both free text and machine-readable information (MRI) applications for identification marking of U.S. military property.

MIL-STD-130-SUP-2 - Identification Marking of U.S. Military Property

MIL-STD-1304 - Report: Reliability And Maintainability Engineering Data (Use Mil-Std-470)

MIL-STD-1339 - Fitting Out Procedures-Ships

MIL-STD-1379 - Military Training Programs (S/S By Mil-Hdbk-1379 And Mil-Prf-29612)

MIL-STD-1388-1 - Logistic Support Analysis (S/S By Mil-Hdbk-502)

MIL-STD-1388-2 - Dod Requirements For A Logistic Support Analysis Record (S/S By Mil-Prf-49506)

This standard prescribes the data element definitions (DED), data field lengths, and formats for Logistic Support Analysis (LSA) Record (LSAR) data. It identifies the LSAR reports that are generated from the LSAR data and identifies the LSAR relational tables and automated data processing (ADF) specifications for transmittal and delivery of automated LSAR data.

MIL-STD-1390 - Level Of Repair Analysis (Lora) (S/S By Mil-Prf-49506)

This standard establishes general requirements and specific tasks for performance of Level of Repair Analysis ) (LORA) during the life cycle of systems or equipment.

MIL-STD-1456 - Configuration Management Plan (S/S By Mil-Std-973)

This standard establishes uniform requirements for CM Plans.

MIL-STD-1464 - Army Nomenclature System

The procedures contained herein detail the methods for establishing item names and type designations as associated with specific categories and types of Army materiel.

MIL-STD-1465 - Configuration Management Of Armaments, Munitions, And Chemical Production Base Modernization

MIL-STD-1521 - Technical Reviews And Audits For Systems, Equipments, And Computer Software

This standard prescribes the requirements for the conduct of Technical Reviews and Auidits on Systems, Equipment, and Computer Software.

MIL-STD-1543 - Reliability Program Requirements For Space And Launch Vehicles

This standard establishes uniform reliability program requirements and tasks for use during design, development, fabrication, test, and operation of space and launch vehicles.

MIL-STD-1629 - Procedures For Performing A Failure Mode, Effects And Criticality Analysis

This standard establishes requirements and procedures for performing a failure mode, effects, and criticality analysis (FMECA) to systematically evaluate and document, by item failure mode analysis, the potential impact of each functional or hardware failure on mission success, personnel and system safety, system performance, maintainability, and maintenance requirements.

MIL-STD-1635 - Reliability Growth Testing

This standard covers the requirements and procedures for reliability development (growth) tests. These tests are conducted during the hardware development phase on samples which have completed environmental tests prior to production commitment, and do not replace other tests described in the contract or equipment specification. These tests provide engineering information on the failure modes and mechanisms of a test item under natural and induced enviromental conditions of military operations. Reliability improvement (growth) will result when failure modes and mechanisms are discovered and identified and their recurrence prevented through implementation of corrective action.

MIL-STD-1661 - Mark And Mod Nomenclature System

This standard sets forth procedures for establishing and changing item names and designations of systems, equipments and material items under the cognizance of the Naval Sea Systems Command and, when officially requested, systems, equipments and material items under the cognizance of the Naval Air Systems Command.

MIL-STD-1662 - Ordnance Alteration (Ordalt) Instructions, Preparation Of

This standard establishes the format, content and procedures for the preparation of ORDALT instructions. ORDALT instructions are prepared in either "short format" or "long format" (formerly, referred to as "short form" or "long form") (see 3.7.1 and 3.7.2).

MIL-STD-1686 - Electrostatic Discharge Control Program For Protection Of Electrical And Electronic Parts, Assemblies And Equipment (Excluding Electrically Initiated Explosive Devices)

The purpose of this standard is to establish comprehensive requirements for an ESD control program to minimize the effects of ESD on parts, assemblies, and equipment.

MIL-STD-1760 - Aircraft/Store Electrical Interconnection System

This standard defines implementation requirements for the Aircraft/Store Electrical (and fiber optic) Interconnection System (AEIS) in aircraft and stores.

MIL-STD-1776 - Aircrew Station And Passenger Accommodations (S/S By Jssg-2010)

This standard provides criteria for the design of aircrew and passenger stations in fixed and rotary wing aircraft procured by the United States Air Force (USAF). Requirements specified herein are for the analyses to be performed in developing the aircrew member and passenger interface and design specifications for the aircrew stations and passenger accommodations, and the integration of controls, displays, and equipment with the aircrew members and passengers.

MIL-STD-1798 - Mechanical Equipment And Subsystems Integrity Program

The purpose of this standard is to describe the general process to achieve and maintain the physical and functional integrity of the mechanical elements of aircraft systems. The goal of this integrity program is to achieve the desired level of safety and aircraft availability at the most economic cost across the life cycle of the weapon system. This standard allows the process to be tailored in a competitive environment to meet specific equipment, subsystem, and/or system requirements. The Mechanical Equipment and Subsystems Integrity Program (MECSIP) is implemented in the planning process and continued until retirement of the system.

MIL-STD-1814 - Integrated Diagnostics (Requests Other Than Dod Refer To (S/S By Mil-Hdbk-1814)

MIL-STD-196 - Joint Electronics Type Designation System

The purpose of this standard is to provide the policies, requirements and procedures for the preparation and submission of Requests for Nomenclature (RFN) under the JETDAS.

MIL-STD-2003 - Electric Plant Installation Standard Methods For Surface Ships And Submarines

This standard covers shipboard installation requirements for electrical cable, equipment, penetrations, cableways, and connectors. This standard consists of this general standard and five parts as follows: Part 1 (Cable) Preparation and end-sealing, entry to equipment and connectors, repair and splicing. Part 2 (Equipment) Equipment mounting, switchboard mounting, battery equipment, casualty power, and shore power. Part 3 (Penetrations) Swage tubes, stuffing tubes, kickpipes, surface ships and submarines, hull penetration, and general. Part 4 (Cableways) General, submarine, surface ship and cable protection. Part 5 (Connectors) Cable and conductor preparation in accordance with MIL-C-81511, MIL-DTL-5015, MIL-DTL-26482, MIL-DTL-28840, MIL-DTL-22992, and MIL-DTL-38999 connectors.

MIL-STD-2003-1 - Electric Plant Installation Standard Methods For Surface Ships And Submarines (Cable)

This standard covers standard methods for cable preparation and end-sealing, entry to equipment and connectors, repair and splicing.

MIL-STD-2003-2 - Electric Plant Installation Standard Methods For Surface Ships And Submarines (Equipment)

This standard covers standard installation methods for casualty power, shore power, electrical equipment, and switchboards.

MIL-STD-2003-3 - Electric Plant Installation Standard Methods For Surface Ships And Submarines (Penetrations)

This standard covers standard methods for swage tubes, stuffing tubes, and kickpipes on surface ships and submarines.

MIL-STD-2003-4 - Electric Plant Installation Standard Methods For Surface Ships And Submarines (Cableways)

This standard covers standard practices for electric plant installation of cableways on surface ships and submarines.

MIL-STD-2003-5 - Electric Plant Installation Standard Methods For Surface Ships And Submarines (Connectors)

This standard covers standard methods for connector fabrication on surface ships and submarines.

MIL-STD-2036 - General Requirements For Electronic Equipment Specifications (For Guidance See Mil-Hdbk-2036)

This standard covers the policy guidance, and general and detailed requirements, for the preparation of specifications for eletronic equipment used in shipboard (including submarines) and space applications. This document provides guidance for the use of commercial-off-the-shelf (COTS), ruggedized, and militarized equipment. Requirements shall be based on the installation and intended use of the equipment.

MIL-STD-2042 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships

This standard provides detailed methods for the installation and test of fiber optic cabling and associated components on Naval surface ships and submarines.

MIL-STD-2042-1 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships (Cables) (Part 1 Of 7 Parts)

This standard provides detailed methods for fiber optic cable selection, handling, marking, and repair.

MIL-STD-2042-2 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships (Equipment) (Part 2 Of 7 Parts)

This standard provides detailed methods for the installation of fiber optic cable topology equipment (see 3.16), and optical fiber cable entry to fiber optic cable topology and other equipment.

MIL-STD-2042-3 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships (Cable Penetrations) (Part 3 Of 7 Parts)

This standard practice provides detailed methods of optical fiber cable penetrations through ship structure and equipment via stuffing tubes, swage tubes, multiple cable penetrators, chafing collars and nipples.

MIL-STD-2042-4 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships (Cableways) (Part 4 Of 7 Parts)

This standard practice provides detailed methods for installing optical fiber cable cableways and cable protection on surface ships and submarines.

MIL-STD-2042-5 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships (Connectors And Interconnections) Part 5 Of 7 Parts)

This standard practice provides detailed methods for installing optical fiber cable connectors and interconnecting devices.

MIL-STD-2042-6 - Fiber Optic Cable Topology Installation Standard Methods For Naval Ships (Tests) (Part 6 Of 7 Parts)

This standard practice provides detailed methods for testing optical fiber cable installations.

MIL-STD-2051 - Fiber Optic Shipboard Cable Topology Design Standard (S/S By Mil-Hdbk-2051)

This standard contains design rules and mandatory requirements for defining a fiber optic topology.

MIL-STD-2068 - Reliability Development Test Program (Use Mil-Std-781)

MIL-STD-2070 - Procedures For Perfor Ming A Failure Mode, Effects & Criticality Analysis For Aeronaut Ical Equipment (Use M Il-Std 1629

MIL-STD-2074 - Failure Classification For Reliability Testing

This standard establishes criteria for classification of failures occurring during reliability tests.

MIL-STD-2084 - General Requirements For Maintainability Of Avionic And Electronic Systems And Equipment (S/S By Mil-Hdbk-2084)

MIL-STD-2097 - Acquisition Of Support Equipment And Associated Integrated Logistics Support (S/S By Mil-Hdbk-2097)

This standard prescribes the requirements for the identification of common and peculiar support equipment for aerospace weapons systems, subsystemd, or major and articles.

MIL-STD-2128 - Aircraft Inventory Record

This standard covers the preparation of the Aircraft Inventory Record (AIR) for use in accomplishing inventories of equipment used on naval aircraft.

MIL-STD-2155 - Failure Reporting, Analysis And Corrective Action System (S/S By Mil-Hdbk-2155)

MIL-STD-2164 - Environmental Stress Screening Process For Electronic Equipment (S/S By Mil-Hdbk-2164)

This standard defines the requirements for ESS of electronics equipment, including environmental test conditions, durations of exposure, procedures, equipment operation, actions taken upon detection of defects, and test documentation.

MIL-STD-2173 - Reliability-Centered Maintenance Requirements For Naval Aircraft, Weapons Systems And Support Equipment (S/S By Mil-Hdbk-2173)

MIL-STD-2186 - Real-Time Outfitting Management Information System, General Requirements For

This standard describes the shipbuilding or overhauling contractor's functions, responsibilities, and requirements applicable to the Real-Time Outfitting Management Information System (ROMIS).

MIL-STD-2189-243-1 - Design Methods For Naval Shipboard Systems Propulsion Shafting (S/S By Mil-Hdbk-2189/243-1)

MIL-STD-2217 - Memory Loader/Verifier Multiplex Bus Interface With Avionic Systems, Requirements For

The Memory Loader/Verifier (MLV) will provide the means for loading and verifying avionics memories in military aircraft utilizing a multiplex bus interface.

MIL-STD-2218 - Thermal Design, Analysis, And Test Procedures For Airborne Electronic Equipment

This standard establishes requirements for thermal design and cooling analyses, thermal design verification tests, and preproduction qualification tests for airborne electronic equipment. These thermal design requirements are provided to ensure that the equipment will operate satisfactorily without manual adjustment under any mode of operation in the aircraft. It also establishes guidelines for test methods for verification testing of the thermal and cooling design and preproduction qualification temperature and humidity tests to ensure that the equipment meets its performance requirements and reliability criteria. This document defines a thermal design process establishing and validating the following: a. Equipment cooling methods and coolant flow requirements. b. Allowable component temperature and component power, based on derating requirements to achieve lowest component temperatures consistent with reliability and life cycle cost (LCC) requirements. c. A thermal design analysis which defines the temperatures, heat sources, heat paths and heat sinks of all temperature critical components for worst-case power, environmental temperature-altitude and coolant flow (where applicable) conditions. d. Thermal design, verification and preproduction qualification tests.

MIL-STD-2222 - Interface Control Documentation For Avionic Systems (S/S By Mil-Hdbk-2222)

This document provides guidelines for developing and using standardized ICDs. It informs the users of these documents how to initiate an ICD, of the coordination process, and of the methods implements to change these contractual instruments. It also provides information to contractors and airframers to allow a though understanding of the type of data required for ICDs on new systems.

MIL-STD-454 - Standard General Requirements For Electronic Equipment (S/S By Mil-Hdbk-454)

This standard covers the common requirements to be used in military specifications for electronic equipment.

MIL-STD-470 - Maintainability Program For Systems And Equipment (S/S By Mil-Hdbk-470)

MIL-STD-471 - Maintainability Verification/ Demonstration/Evaluation (S/S By Mil-Hdbk-471)

This standard provides procedures and test methos for verification, demonstration, and evaluation of qualitative and quatitative maintainability requirements. It also provides for qualitative assessment of various integrated logistic support factors related to and impacting the achievement of maintainability parameters and item downtime, e.g., technical manuals, personnel, tools and test equipment, maintenance concepts and provisioning.

MIL-STD-480 - Configuration Control - Engineering Changes, Deviations And Waivers (S/S By Mil-Std-973)

This standard establishes the requirements, formats, and procedures to be utilized in the preparation of configuration control documentation.

MIL-STD-481 - Configuration Control - Engineering Changes (Short Form), Deviations And Waivers (S/S By Mil-Std-973)

This standard establishes requirements, formats and procedures for the preparation, submission and approval or disapproval of engineering change proposals (ECPs), utilizing DD Form 1693, and requests for deviations and waivers utilizing DD Form 1694.

MIL-STD-482 - Configuration Status Accounting Data Elements And Related Features (S/S By Mil-Std-973)

This standard establishes the data elements and their related data items, codes, use identifiers, and data chains (referred to as "related features") to be used as the content of configuration status accounting records.

MIL-STD-483 - Configuration Management Practices For Systems, Equipment, Munitions, And Computer Programs (S/S By Mil-Std-973)

This standard establishes requirements for configuration management.

MIL-STD-490 - Specification Practices (S/S By Mil-Std-961)

This standard establishes the format and contents of specifications for program-peculiar configuration items, processes, and materials.

MIL-STD-5400 - Electronic Equipment, Airborne, General Requirements For (See Mil-Hdbk-5400 For Guidance)

MIL-STD-690 - Failure Rate Sampling Plans And Procedures

This standard provides procedures for failure rate (FR) qualification, sampling plans for establishing and maintaining FR levels at selected confidence levels, and lot conformance inspection procedures associated with FR testing for the purpose of direct reference in appropriate military electronic parts established reliability (ER) specifications. Figures and tables throughout this standard are based on exponential distribution. Weibull distribution will be acceptable in certain components such as capacitors. Use of Weibull distribution for any component must be approved by the qualifying activity. This standard also provides guidance to specification writers in the use of this standard (see appendix A) and references material for users of ER parts.

MIL-STD-690-SUP - Failure Rate Sampling Plans and Procedures

MIL-STD-704 - Aircraft Electric Power Characteristics

This standard establishes the requirements and characteristics of aircraft electric power provided at the input terminals of electric utilization equipment. MIL-HDBK-704-1 through-8 defines test methods and procedures for determining airborne utilization equipment compliance with the electric power characteristics requirements defined herein. Electromagnetic interference and voltage spikes are not covered by this standard.

MIL-STD-721 - Definitions Of Terms For Reliability And Maintainability

The purpose of this standard is to define words and terms used most frequently in specifying Reliability and Maintainability (R & M) to give these terms a common meaning for the Department of Defense and defense contractors.

MIL-STD-756 - Reliability Modeling & Prediction

This standard establishes uniform procedures and ground rules for the preparation of Mission Reliability and Basic Reliability models and predictions for electronic, electrical, electro-mmechanical, mechanical, and ordnance systems and equipments, hereinafter referred to as items.

MIL-STD-757 - Reliability Evaluation From Demonstration Data

MIL-STD-780 - Work Unit Codes For Aeronautical Equipment; Uniform Numbering System

The purpose of this standard is to identify Work Unit Code System Codes, define the methods used in assignment of Work Unit Codes and describe the use of Work Unit Codes in maintenance data collection systems.

MIL-STD-781 - Reliability Testing For Engineering Development, Qualification, And Production (S/S By Mil-Hdbk-781)

This standard specifies the general requirements and specific tasks for reliability testing during the development, qualification, and production of systems and equipment.

MIL-STD-785 - Reliability Program For Systems And Equipment Development And Production

Yhis standard provides general requirements for specific tasks for reliability programs during the deleclopment, production, and initial deployment.

MIL-STD-792 - Identification Marking Requirements For Special Purpose Components

The purpose of this standard is to provide general requirements for the marking of raw materials, products and components.

MIL-STD-910 - Mobile Tactical Systems Overload Prevention Procedures (S/S By Mil-Hdbk-910)

MIL-STD-970 - Standards And Specifications, Order Of Preference For The Selection Of

This standard sets forth the order of preference for the selection of standards and specifications used in the design, acquisition, construction and support of material for the Department of Defense in compliance with the Office of Management and Budget (OME) Circular A-119 on using commercial practices and non-Government standards.

MIL-STD-973 - Configuration Management (S/S By Eia649)

This standard defines configuration management requirements which are to be selectively applied, as required, throughout the life cycle of any configuration item (CI): a. Developed wholly or partially with Government funds, including non-developmental items when the development of technical data is required to support off-the-shelf equipment of software, or b. Designated for configuration management for reason of integration, logistics support, or interface control.

MIL-W-5088 - Wiring, Aerospace Vehicle (Future Design Should Refer To Sae-As50881)

This specification covers all aspects from the selection through installation of wiring and wiring devices used in aerospace vehicles.

NFPA-T2.6.1 - Method For Verifying The Fatigue And Establishing The Burst Pressure Ratings Of The Pressure Containing Envelope Of A Metal Fluid Power Component

This standard provides, test and statistical methods for generating fatigue distribution data. Test and statistical methods for conducting a verification of the pressure ratings on fluid power components.